Pages (4): [ Gaskets 1] Gaskets 2 Gaskets 3 Gaskets 4
BOP One-Piece Oil Pan Gasket |
|
|
Pontiac One-Piece Oil Pan Gasket
The BOP one piece oil pan gasket works with ALL Pontiac V-8's '59-'81 as they all share the same foot print. The rear cap area cross-section is square like the cork so it fits perfectly into the main cap with the groove ('59-'72). We used the 3 tabs that will fit '73-'76 and most after market pans Canton , Milodon, etc.) This design should not be confused with the normal 3 tab design that has a curved bot tom and is notorious for slipping out of place. This will also work on the 5 tab pans ('77-'81) with minor pan slot modification or removal of outside tabs and minor sealer. If your pan does not have the 3 tab slots ('59-'72) you can cut them off with a razor blade. Silicone/sealer is only recommended at the bend points of the timing cover and where the rear curve meets the block to account for any minor alignment discrepancies. Thickness is .093" This is a well engineered part that is quick, clean, reliable, and reusable. You will not be disappointed.
OPG49 Pontiac One-Piece Oil Pan Gasket '59 - '81............................. $69.99
|
Pontiac Mutli-piece Oil Pan Gasket |
|
|
Pontiac Multi-Piece Oil Pan Gasket
Traditional Pontiac multipiece oil pan gasket. Fits '59 - '81 Pontiac V-8.
OPG50 Pontiac Multi-Piece Oil Pan Gasket '59 - '81............................ $24.99
|
Permatex Ultra Black Sealer |
|
|
Permatex Ultra Black Silicone Sealer
We use Permatex Ultra Black sealer for it's Maximun Oil Resistence
and highly recommend it for all oil pan gaskets including the BOP OPG49 one-piece oil pan gasket and all of our rear main seals. 3.35 oz tube.
PUB51 Permatex Ultra Black Silicone Sealer (ea.)................................ $8.99
|
BOP Oil Pan Reinforcement Plates |
|
|
Pontiac Oil Pan Reinforcement Plates
These stainless steel plates help provide even clamping force across the rear corners of the oil pan to secure gasket and prevent leaks. Plates are highly recommended for all oil pan gaskets including the BOP OPG49 one-piece oil pan gasket.
OPR90 Pontiac Oil Pan Reinforcment Plates (pr)................................ $14.99
|
BOP Two-Piece Rear Main Seal |
|
|
Viton ® Pontiac Two-Piece Rear Main Seals
With the mandated removal of asbestos from the factory type rope seals, increased leakage has become commonplace. To address this problem BOP Engineering devoloped a rear main seal for the traditional Pontiac V-8's. These seals are not a retrofit from some other engine, but designed from a clean slate using state of the art technology and the best materials. 20 plus years of proven sucess makes this the best two-piece seal on the market. Available in both 3 main size 301 - 400 engines and small journal aftermarket blocks, and for 3 1/4" main size 421 - 455 engines and large journal aftermarket blocks.
Do not be fooled by Imitations!
Click Here to see the difference.
Click here to view install procedures (Requires adobe acrobat)
|
BOP One-Piece Rear Main Seal |
|
|
Viton ® Pontiac One-Piece Rear Main Seals
The new BOP Engineering One-piece rear mail seal is the most advanced rear main seal on the market for the traditional Pontiac V-8. This revolutionary design features a number of state of the art innovations including relocation of the parting line which greatly reducing the risk of leaking, a more pliable construction that will work more effectively in engines with seal groove geometry issues, and double lip design to provide twice the protection against leakage as well as supporting outstanding vacuum numbers. Crankshaft must be out of the block to fit this seal prior to installation. Available in both 3 main size 301 - 400 engines and small journal aftermarket blocks, and for the 3 1/4" main size 421 - 455 engines and large journal aftermarket blocks.
Click here to view install procedures (Requires adobe acrobat)
|
|
|
Best Gasket Rope Rear Main Seal
Replaces non-asbestos fiberglass core rope seals found in most kits. Made by Best Gasket Company the Graphtite™ rope seal is a cost effective solution to rear main seal leaks. It also works well with blocks whose seal grooves are not suited for a lip type rear main seal such as blocks that have had multiple align bores. Available in both 3 main size 301 - 400 engines and small journal aftermarket blocks, and for 3 1/4" main size 421 - 455 engines and large journal aftermarket blocks.
|
|
|
Pontiac Full Gasket Set
Full gasket sets include all the gaskets required to seal the entire engine. These sets fit all traditional Pontiac 326-455 V-8 engines except the 301, RAII, RAIV, 455HO and 455SD. For '61 - '64 engines and Intake gasket set SIG139. Also does not include the BOP specialty gaskets such as our rear main seals and one-piece oil pan gaskets and valve cover gaskets.
|
Best Gasket Engine Rebuild Set |
|
|
Best Gasket Engine Rebuilding Set 1958-1960
Best Gasket has become the go to for vintage gaskets featuring more complete and better quality gaskets than most other rebuild sets on the market. These sets feature every gasket you should need (see larger image) and contain the Graphtite™ rope seal. This set fits all Pontiac V-8s from 1958-1960 370 & 389 CID. (Note that these sets do not include any of the BOP specialty gaskets such as our Viton ® rear main seals, one-piece oil pan gaskets, or steel core valve cover gaskets.)
RS617G
FGS252 Pontiac V-8 Engine Rebuild Set 1958-60 370 & 389 CID......$129.99
|
Best Gasket Engine Rebuild Set |
|
|
Best Gasket Engine Rebuilding Set 1961-1966
Best Gasket has become the go to for vintage gaskets featuring more complete and better quality gaskets than most other rebuild sets on the market. These sets feature every gasket you should need (see larger image) and contains the Best Graphtite™ rope seal. This set fits all Pontiac V-8s from 1961-1966 326, 389 & 421 CID. (See our gaskets on page 2) (Note that these sets do not include any of the BOP specialty gaskets such as our Viton ® rear main seals, one-piece oil pan gaskets, or steel core valve cover gaskets.)
RS617G-2
FGS253 Pontiac V-8 Engine Rebuild Set 1961-66 370 & 389 CID......$139.99
|
Best Gasket Engine Rebuild Set |
|
|
Best Gasket Engine Rebuilding Set 1967-1979
Best Gasket has become the go to for vintage gaskets featuring more complete and better quality gaskets than most other rebuild sets on the market. These sets feature every gasket you should need (see larger image) and contain the Graphtite™ rope seal. This set fits all Pontiac V-8s from 1967-1979 350, 400, 428 & 455 CID except the 301, and will fit RAII, RAIV, 455HO and 455SD with the exception of the intake gaskets.(Note that these sets do not include any of the BOP specialty gaskets such as our Viton ® rear main seals, one-piece oil pan gaskets, or steel core valve cover gaskets.)
RS673G
FGS254 Pontiac V-8 Engine Rebuild Set 1967-79 350- 455 CID........ $139.99
|
Copyright 1999-2007, BOP
Engineering Co All rights reserved
|
